Filter
Top Products
1030 DIMM
For access, remove these FRUs in order:
v “1010 Battery pack” on page 68
v “1020 Bottom slot cover” on page 70
Table 10. Removal steps of DIMM
1
a b
1
2
Note: If only one DIMM is used on the computer you are servicing, the card
must be installed in SLOT-0 (a), but not in SLOT-1 (b).
When installing: Insert the notched end of the DIMM into the socket. Press the
DIMM firmly, and pivot it until it snaps into the place. Make sure that it is
firmly fixed in the slot and does not move easily.
72 ThinkPad Edge 13″ and E30 Hardware Maintenance Manual