Filter
Top Products
Using the optical drive
Note: Your computer only supports the MultiBurner drive.
MultiBurner drive
This drive can read DVD-ROM discs, DVD-R discs, DVD-RAM discs, DVD-RW discs, and all types of CDs,
such as CD-ROM discs, CD-RW discs, CD-R discs, and audio CDs. In addition, it can record on DVD-R
discs, DVD-RW discs, type II DVD-RAM discs, CD-RW standard and high speed discs, and CD-R discs.
Using a ash media Card
Your computer has one Media Card Reader slot.
The Media Card Reader slot supports the following four types of cards:
• SD cards
• SDHC cards
• SDXC cards
• MultiMediaCards
Note: When transferring data to or from a media card, such as an SD card, do not put your computer in
sleep or hibernation mode before the data transfer is complete. To do so might cause damage to your data.
For more information on ash media cards, refer to any of the following topics:
• “Inserting a ash media card” on page 46
• “Removing a ash media card” on page 47
Inserting a ash media card
Attention: Before you start installing any of the following cards, touch a metal table or a grounded metal
object. This action reduces any static electricity from your body. The static electricity could damage the card.
• SD card
• SDHC card
• SDXC card
• MultiMediaCard
To insert a ash media card into the 4-in-1 media card reader slot, do the following:
1. Make sure that the card is correctly oriented.
2. Insert the card rmly into the 4-in-1 media card reader slot. The card might stop before it is completely
installed into the slot.
If the ash media card is not Plug and Play, do the following:
1. Click Start ➙ Control Panel ➙ Hardware and Sound ➙ Device Manager. If you are prompted for an
administrator password or conrmation, type the password or provide conrmation.
2. From the Action menu, select Add legacy hardware. The Add Hardware Wizard starts.
3. Follow the instructions on the screen.
46 User Guide