Lenovo 2226 Laptop User Manual


 
The monitor might be operating in a low-refresh rate display mode. Set the monitor to the highest,
noninterlaced refresh rate supported by your monitor and the video controller in your computer.
Attention: Using a resolution or refresh rate that is not supported by your monitor might damage it. Check
the documentation that comes with your monitor to verify the supported refresh rates.
The monitor might be affected by interference from nearby equipment. Magnetic elds around other
devices, such as transformers, appliances, uorescent lights, and other monitors might be causing the
problem. Move uorescent desk lighting or any equipment that produces magnetic elds farther away
from the monitor. If this does not correct the problem, do the following:
1. Turn off the monitor. (Moving a color monitor while it is turned on might cause screen discoloration.)
2. Adjust the placement of the monitor and other devices so that they are at least 305 mm (12 inches)
apart.
3. Turn on the monitor.
You can reset the refresh rate through your operating system Control Panel.
On the Windows 7 operating system, click Start Control Panel Hardware and Sound Adjust
screen resolution Advanced Settings. Then click the Monitor tab and select a new refresh rate.
See your operating system documentation or help for further information on monitor settings.
If these actions do not correct the problem, your monitor might need service. See Chapter 11 “Getting
information, help, and service” on page 105 for details.
The image is discolored
Symptom: The image is discolored.
Action: The monitor might be affected by interference from nearby equipment. Magnetic elds around other
devices, such as transformers, appliances, uorescent lights, and other monitors might be causing the
problem. Move uorescent desk lighting or any equipment that produces magnetic elds further away from
the monitor. If this does not correct the problem, do the following:
1. Turn off the monitor. (Moving a color monitor while it is turned on might cause screen discoloration.)
2. Adjust the placement of the monitor and other devices so that they are at least 305 mm (12 inches) apart.
3. Turn on the monitor.
If these actions do not correct the problem, your monitor might need service. See Chapter 11 “Getting
information, help, and service” on page 105 for details.
Networking problems
The following are the most common networking problems. Select your networking problem from the
following list:
“Ethernet problems” on page 94
“A wireless LAN problem” on page 96
“A wireless WAN problem” on page 96
“Bluetooth problems” on page 96
For more information, see “Help and Support” on page 105.
Ethernet problems
For Ethernet problems, select your symptom from the following list:
“Your computer cannot connect to the network” on page 95
94 ThinkCentre User Guide