Filter
Top Products
Table 29. Removal steps of base cover assembly, I/O sub card, and I/O sub card cable (continued)
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover,
you need to apply the following labels:
18
Homologation label
Following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
1
Windows license label (COA)
2
Qualcomm Wireless WAN label
3
Ericsson wireless WAN label
4
Wireless LAN MAC address label
5
MAC address label
6
SIRM labels
7
Israel label (76.3 mm x 31.6 mm)
8
Wireless card label (only for Brazil)
9
Modem label (only for PRC model)
10
Bluetooth label (only for Brazil)
11
China wireless WAN label
12
Israel label (63.5 mm x 19 mm)
13
Anatel wireless WAN label (only for Brazil)
14
Vodafone label
15
Modem AMOM label (only for Brazil)
16
FCC label
17
Information label
19
Serial number label
20
Asset tag label
For some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one or two FCC
labels, nd duplicates of them in the label kit and apply them to the new base cover.
128 ThinkPad T410 and T410i Hardware Maintenance Manual