1060 DIMM (in bottom slot)
For access, remove these FRUs in order:
• “1010 Battery pack” on page 85
• “1050 DIMM slot cover” on page 90
Note: This product has two DIMM slots: one under the keyboard and another on the underside of the
computer. If you install a DIMM in only one of the two slots, install it in the slot located under the keyboard.
Table 14. Removal steps of DIMM (in bottom slot)
1
1
2
When installing: Insert the notched end of the DIMM into the socket. Press the DIMM rmly, and pivot it until it
snaps into the place. Make sure that it is rmly xed in the slot and does not move easily.
Chapter 8. Removing and replacing a FRU 91