Filter
Top Products
Installing external options
External speakers, a printer, or a scanner can be connected to your computer. For
some external options, you must install additional software in addition to making
the physical connection. When installing an external option, see “Locating
connectors on the front of your computer” on page 6 and “Locating connectors on
the rear of your computer” on page 7 to identify the required connector, and then
use the instructions that come with the option to help you make the connection
and install any software or device drivers that are required for the option.
Opening the computer cover
This section provides instructions on how to open the computer cover.
CAUTION:
The heat sink and microprocessor might be very hot. Turn off the computer and
wait three to five minutes to let the computer cool before opening the computer
cover.
Important
Be sure to read and understand “Handling static-sensitive devices” on page
11 before opening the computer cover.
To open the computer cover:
1. Remove any media from the drives, shut down your operating system, and
turn off all attached devices and the computer.
2. Unplug all power cords from electrical outlets.
3. Disconnect the cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer. See “Locating connectors on the front of your computer” on page 6
and “Locating connectors on the rear of your computer” on page 7.
4. Remove any locking devices, such as a cable lock that secures the computer
cover.
12 User Guide