Lenovo 3719 Server User Manual


 
4. Turn on the server. If the problem remains, suspect the following components in
the following order:
a. Power supply
b. Power-supply cage
c. Memory
d. Microprocessor
e. System board
If the problem is solved when you remove an adapter from the server but the
problem recurs when you reinstall the same adapter, suspect the adapter; if the
problem recurs when you replace the adapter with a different one, suspect the
system board or extender card.
If you suspect a networking problem and the server passes all the system tests,
suspect a network cabling problem that is external to the server.
Problem determination tips
Because of the variety of hardware and software combinations that you can
encounter, use the following information to assist you in problem determination. If
possible, have this information available when you request assistance from Lenovo.
v Machine type and model
v Microprocessor and hard disk drive upgrades
v Failure symptoms
Does the server fail the diagnostic tests?
What occurs? When? Where?
Does the failure occur on a single server or on multiple servers?
Is the failure repeatable?
Has this configuration ever worked?
What changes, if any, were made before the configuration failed?
Is this the original reported failure?
v Diagnostic program type and version level
v Hardware configuration (print screen of the system summary)
v Lenovo ThinkServer Server Firmware level
v Operating-system type and version level
You can solve some problems by comparing the configuration and software setups
between working and nonworking servers. When you compare servers to each
other for diagnostic purposes, consider them identical only if all the following factors
are exactly the same in all the servers:
v Machine type and model
v Lenovo ThinkServer Server Firmware level
v Adapters and attachments, in the same locations
v Address jumpers, terminators, and cabling
v Software versions and levels
v Diagnostic program type and version level
v Configuration option settings
v Operating-system control-file setup
Chapter 5. Diagnostics 125