Filter
Top Products
b. Align the sliding hinge mount 1 with the hinge pin 2 on the hinge
assembly 3 on the chassis.
c. Press the sliding hinge mount against the hinge pin until the sliding hinge
mount snaps onto the hinge pin.
4. Close the bezel (see “Closing the bezel” on page 151).
5. Lock the left-side cover.
Opening the bezel media door
To open or remove the media door, do the following:
1. Read the safety information that begins on page 5.
2. Unlock the side cover.
Note: You must unlock the side cover to open or remove the bezel. When you
lock the server side cover, it locks both the cover and the bezel.
3. Grasp the depressed area on the left side of the bezel door and rotate the bezel
to the open position.
4. From inside of the top section of the bezel door, slide the blue tab up to unlock
the bezel media door; then, grasp the depressed area on the left side of the
media door and pull the door open.
Chapter 7. Installing optional devices and replacing customer replaceable units 155