Filter
Top Products
Table 4. Modem result codes (continued)
63
CONNECT 26400
The modem has connected to the line, the DTE speed is 26400 bps
and DTE speed reporting is enabled.
64
CONNECT 28800
The modem has connected to the line and either the line speed is
28800 bps and DCE speed reporting is enabled, or the DTE speed is
28800 bps and DTE speed reporting is enabled.
66
+DR: ALT
The modem has connected to the line in MNP Class 5 and +DR:
message reporting is enabled. (See S95, Wn, and Xn.)
67
+DR: V.42B
The modem has connected to the line in V.42 bis and +DR: message
reporting is enabled. (See S95, Wn, and Xn.)
69
+DR: NONE
The modem has connected to the line without data compression and
+DR: message reporting is enabled. (See S95, Wn, and Xn.)
70
+ER: NONE
The modem has connected to the line without any form of error
correction and the +ER: message reporting has been enabled. (See
S95, Wn, and Xn.)
77
+ER: LAPM
The modem has connected to the line in V.42 LAPM error correction
mode and +ER: message reporting has been enabled. (See S95,
Wn, and Xn.)
78
+MRR: 31200
The modem has connected to the line at 31200 bps and carrier
reporting is enabled. (See S95 and Xn.)
79
+MRR: 33600
The modem has connected to the line at 33600 bps and carrier
reporting is enabled. (See S95 and Xn.)
80
+ER: ALT
Sent when the modem has connected in the MNP mode of error
correction, and +ER: message reporting has been enabled. (See
S95, Wn, and Xn.)
83
LINE IN USE
The modem attempted to go off-hook when an extension was
already occupying the line.
84
CONNECT 33600
The modem has connected to the line, the DTE speed is 33600 bps
and the DTE speed reporting is enabled.
91
CONNECT 31200
The modem has connected to the line DTE speed is 31200 bps and
the modem is to report the DTE speed upon connecting.
134
+MCR: B103
The modem has connected to the line with Bell 103 modulation and
modulation reporting is enabled. (See +MR, S95 and Xn.)
135
+MCR: B212
The modem has connected to the line with Bell 212 modulation and
modulation reporting is enabled. (See +MR, S95 and Xn.)
136
+MCR: V21
The modem has connected to the line with ITU-T V.21 modulation
and modulation reporting is enabled. (See +MR, S95 and Xn.)
137
+MCR: V22
The modem has connected to the line with ITU-T V.22 modulation
and modulation reporting is enabled. (See +MR, S95 and Xn.)
138
+MCR: V22B
The modem has connected to the line with ITU-T V.22 bis modulation
and modulation reporting is enabled. (See +MR, S95 and Xn.)
139
+MCR: V23
The modem has connected to the line with ITU-T V.23 modulation
and modulation reporting is enabled. (See +MR, S95 and Xn.)
140
+MCR: V32
The modem has connected to the line with ITU-T V.32 modulation
and modulation reporting is enabled. (See +MR, S95 and Xn.)
141
+MCR: V32B
The modem has connected to the line with ITU-T V.32 bis modulation
and modulation reporting is enabled. (See +MR, S95 and Xn.)
142
+MCR: V34
The modem has connected to the line with ITU-T V.34 modulation
and modulation reporting is enabled. (See +MR, S95 and Xn.)
Chapter 2. Using your computer 63