Filter
Top Products
Restart menu
If you need to close the ThinkPad Setup and restart the system, select Restart from the ThinkPad Setup
menu. The following submenu is displayed:
• Exit Saving Changes: Restart the system after saving the changes.
• Exit Discarding Changes: Restart the system without saving the changes.
• Load Setup Defaults: Load the default setting that was in effect at the time of purchase.
• Discard Changes: Discard the changes.
• Save Changes: Save the changes.
ThinkPad Setup items
The following tables show the contents of the Cong menu, the Security menu, and the Startup menu
of the ThinkPad Setup.
Note: Some items are displayed on the menu only if the computer supports the corresponding features.
Notes:
• Enabled means that the function is congured.
• Disabled means that the function is not congured.
• Default values are in boldface.
Cong menu items
Table 8. Cong menu items
Menu item
Submenu item Selection Comments
Wake On LAN
• Disabled
• AC only
• AC and Battery
Enable the system to Power
on when the Ethernet
controller receives a magic
packet.
If you select “AC Only”,
Wake On LAN is enabled
only when acpower adapter
is attached.
If you select “AC and
Battery”, Wake On LAN is
enabled with any power
sources.
Note: AC is required with
magic packet type Wake
On LAN.
Note: Wake On LAN
function does not work
when a hard disk password
is set.
Network
Ethernet LAN Option ROM
• Disabled
• Enabled
Load the Ethernet LAN
Option ROM to enable
startup from an integrated
network device.
206 User Guide