Filter
Top Products
Table 10. Removal steps of battery pack
DANGER
Use only the battery specied in the parts list for your computer. Any other battery could ignite
or explode.
Unlock the battery latch 1 . Holding the battery latch in the unlocked position 2 , remove the battery pack in
the direction shown by arrow 3 .
3
21
When installing: Install the battery pack in the slot, and then make sure that the battery latch is in the locked position.
1020 Serial Ultrabay Enhanced device or travel bezel
For access, remove this FRU:
• “1010 Battery pack” on page 70
Table 11. Removal steps of Serial Ultrabay Enhanced device or travel bezel
Holding the bay lock latch in the unlocked position 1 , slide the bay eject latch 2 , and then pull out the Serial
Ultrabay Enhanced device or the travel bezel in the direction shown by arrow 3 .
Chapter 9. Removing and replacing a FRU 71
Downloaded from LpManual.com Manuals