Filter
Top Products
Installing an inverter
Attention
Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre
Safety and Warranty Guide, go to:http://www.lenovo.com/support
To install an inverter, do the following:
1. Place the inverter into place so that the two screw holes in the inverter align with the holes in the
system board shielding.
2. Replace the inverter cover to the inverter.
Note: The inverter cover only ts one way to the inverter.
3. Install the two screws that secure the inverter to the system board shielding.
4. Connect the three cables to the inverter.
5. Install the inverter shielding that was removed by inserting one end into the slots and reinstalling the
screw.
Chapter 9. Replacing FRUs 99