Filter
Top Products
10. Carefully lift the microprocessor straight up and out of the socket, and place it on a static-protective
surface.
Installing the microprocessor and heat sink assembly
To install a microprocessor and heat sink assembly, do the following:
1. Touch the static-protective package that contains the new microprocessor to any unpainted metal
surface on the computer; remove the microprocessor from the package.
2. Align the microprocessor 1 with the socket (note the alignment mark 2 and the position of the notches
3 and 4 ); carefully place the microprocessor on the socket and close the microprocessor bracket frame.
Note: The microprocessor ts only one way on the socket.
90 ThinkCentre Hardware Maintenance Manual