Lenovo 5354 Computer Hardware User Manual


 
Diagnostic error code FRU/Action
000-250-XXX BIOS APM failure 1. Flash the system. See “Updating (ashing) BIOS
from a disc” on page 99
2. System board
000-270-XXX BIOS ACPI failure 1. Flash the system. See “Updating (ashing) BIOS
from a disc” on page 99
2. System board
001-000-XXX System test passed
No action
001-00X-XXX System error System board
001-01X-XXX System error System board
001-024-XXX System addressing test failure System board
001-025-XXX System checksum value error 1. Flash the system. See “Updating (ashing) BIOS
from a disc” on page 99
2. System board
001-026-XXX System FLASH data error 1. Flash the system. See “Updating (ashing) BIOS
from a disc” on page 99
2. System board
001-027-XXX System conguration/setup error 1. Run Setup
2. Flash the system. See “Updating (ashing) BIOS
from a disc” on page 99
3. System board
001-032-XXX System device controller failure System board
001-034-XXX System device buffer allocation failure
1. Reboot the system
2. Flash the system. See “Updating (ashing) BIOS
from a disc” on page 99
3. Run memory test
4. System board
001-035-XXX System device reset condition detected System board
001-036-XXX System register error System board
001-038-XXX System extension failure
1. Adapter card
2. System board
001-039-XXX System DMI data structure error 1. Flash the system. See “Updating (ashing) BIOS
from a disc” on page 99
2. System board
001-040-XXX System IRQ failure 1. Power-off/on system and re-test
2. System board
001-041-XXX System DMA failure 1. Power-off/on system and re-test
2. System board
001-195-XXX System test aborted by user
Information only Re-start the test, if necessary
001-196-XXX System test halt, error threshold exceeded
1. Press F3 to review the log le
2. Re-start the test to reset the log le
Chapter 7. Symptom-to-FRU index 47