Filter
Top Products
Replacing the hard disk drive
Important
When a new hard disk drive is installed, a set of Product Recovery discs might
be required. The set of Product Recovery discs enable the contents of the hard
disk to be restored to the same state as when the computer was originally
shipped from the factory. For more information on recovering
factory-installed software, refer to ″Recovering Software″ in the User Guide.
This procedure describes how to remove and replace the hard disk drive.
1. Open the computer cover. See “Opening the cover” on page 88.
2. Locate the hard disk drive.
3. Unlatch the hard disk drive front retainers 1 and rotate the hard disk drive
upwards.
104 Hardware Maintenance Manual