Filter
Top Products
Naming Your px4-300r Network Storage Array
You can provide a meaningful name for your px4-300r using the Device Identification page. This page in
the px4-300r Management Console enables you to change the Storage Device Name, the Storage Device
Descriptive Name, and the Workgroup Name.
Change any of these by editing the text fields. Click Apply to save your changes.
● Device Name: Enter a name for the px4-300r device. Use a name that will help you identify it on
your network.
● Device Descriptive Name: Enter a descriptive name for the px4-300r device. This name can
provide additional detail that identifies the device. If you leave this field blank, the default device
name is used.
● Workgroup Name: Enter a workgroup name for the px4-300r device if you need to change the
default name. The workgroup name identifies a group of computers that share information with
each other. Change the workgroup name only if you explicitly define a workgroup on your network.
Most users won't need to change the workgroup name, unless they have explicitly defined a
different workgroup on their other computers.
Renaming the px4-300r will require a device restart.
Setting up Active Directory
If your px4-300r supports Active Directory, you configure AD on the Device Identification page. Refer to
Configuring Your px4-300r for Active Directory.
Setting up Your px4-300r Network Storage Array
10 Naming Your px4-300r Network Storage Array