Filter
Top Products
Selecting a temporary startup device
Use this procedure to startup from any boot device.
Note: Not all CDs and hard disks are startable (bootable).
1. Turn off your computer.
2. While turning on your computer, repeatedly press and release the F12 key to
enter the Startup Device Menu.
3. Select the desired startup device from the Startup Device Menu and press Enter
to begin.
Note:
Selecting a startup device from the Startup Device Menu does not
permanently change the startup sequence.
Changing the startup sequence
To view or change the primary or automatic power-on startup sequence, do the
following:
1. Start the Setup Utility program (see Chapter 2, “Using the Setup Utility
program,” on page 21).
2. Select Startup.
3. Select Startup Sequence. See the information displayed on the right side of the
screen.
4. Select the devices for the Primary Startup Sequence, the Automatic Startup
Sequence, and the Error Startup Sequence.
5. Select Exit from the Setup Utility menu and then Save Settings or Save and
exit the Setup Utility.
If you have changed these settings and want to return to the default settings, select
Load Default Settings on the Exit menu.
Chapter 2. Using the Setup Utility program 25