Filter
Top Products
2040 Antenna kit and LCD rear cover assembly
For access, remove these FRUs in order:
• “1010 Battery pack” on page 59
• “1020 Bottom door” on page 60
• “1030 Hard disk drive (HDD)” on page 62
• “1070 Keyboard” on page 68
• “1080 Palm rest assembly, power-on board assembly (with cable), and microphone” on page 71
• “1120 System board, fan assembly, and backup battery” on page 77
Table 29. Removal steps of antenna kit and LCD rear cover assembly
1
1
2
2
3
3
4
4
When installing:
When you install the antenna kit, route the cables as shown in the gures below. As you route the cables, make
sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable
guides, or a wire to be broken.
a : Wireless LAN AUX antenna (black) and wireless WAN AUX antenna (blue)
b : Wireless LAN MAIN antenna (gray) and wireless WAN MAIN antenna (red)
a b
Chapter 8. Removing and replacing a FRU 93