Lenovo 3000 H Series Personal Computer User Manual


 
22
Lenovo 3000 H Series User Manual
The desktop display can be adjusted in the
Display Properties. Right click on any place
in the desktop that has no icons, and select
"Properties".
You can find the options of Themes,
Desktop, Screen Saver, Appearance,
Settings, and etc.
Desktop: Allows you to set the
background picture.
Screen Saver: Allows you to select the
screen saver program.
Appearance: Allows you to set the icons
and texts.
Settings: Allows you to set the screen
resolution and color quality.
4.1 Display
1.Blank screen
1) Check to see if the monitor is turned on. If not, press the power button on the monitor.
2) Check to make sure that the power cable of the monitor is properly plugged into the monitor and into a
working electrical outlet.
3) Check to see if the signal cable of the monitor is securely connected to the video output of the VGA
card of the computer. If not, shut down your operating system and connect the signal cable.
2.Settings of display properties
3.There is waterwave on the monitor screen
Check to see if there are any electronic devices that generate magnetic interference, such as refrigerator,
electric fan, electric dryer, UPS, manostat, and fluorescent lamp, within the distance of one meter around
the computer. Or, if the two monitors of two computers stay close to each other (within one meter), there
also might be water wave in the screen display. To resolve the problem, please move the interfering source
away from the computer. If the problem still exists, please contact your Lenovo Customer Service Center
for help.
4.2 Sound
1.When the headphones are connected to the front audio output connector, the
speakers that are connected to the rear panel have no sound.
The front audio output connector is provided for the convenience of use, which has a higher priority than
the rear audio output connector. Therefore, if the speakers or headphones are connected to the front
audio output connector, then the sound device that is connected to the rear audio output connectors will
be disabled.