Filter
Top Products
Chapter 6. ThinkServer Remote Management Module Web
console options
This section describes every page of Web console and each page is divided into several parts corresponding
separately to the four tabs on the horizontal toolbar. In each part, there are detail illustrations and
introductions to each menu option in the left menu.
Notes:
• The rst menu item of each tab is default page which will automatically appear when selecting the
corresponding tab.
• Click the HELP button on the right horizontal toolbar, and the Web console will show the relevant
information of each page.
System information
By default, the home page of ThinkServer Remote Management Module shows the system information page
including general information of the system. For more details, see the section below.
View System Information
The System Information page shows the summary of the general system information.
The System Information page provides the following server information:
Information Description
Device Power Status Indicate the device power status (On/Off).
Note: This indicates the BMC status.
Firmware Revision
The revision of BMC Firmware.
AuxFirmware Revision
BMC AuxFirmware Revision.
Build Time
Date and time of building BMC Firmware.
Server Health
The Server Health page shows the data related to the server's health, such as sensor readings and event
logs. Click the Server Health tab to show this page. By default, this tab will automatically open the sensor
reading page.
View Sensor Readings
The Sensor Readings page shows the system sensor information including readings and status.
The table below lists the available options on this page:
Option
Task Description
The Sensor Selection drop-down list box
Used to select the types of sensor readings that are shown
on the lists. The default setup is to show all sensors.
Sensor Readings list
Used to show the names, status and readings of the
selected sensors.
© Copyright Lenovo 2010
15