Filter
Top Products
Table 1. Numeric error codes (continued)
Symptom or error FRU or action, in sequence
7001
(HDCP) Memory is not enough for HDCP
Key Provisioning!
Add the DIMMs.
7002
(HDCP) Failed to check the key set
Family-EKS!
System board.
7003
(HDCP) Chip-Unique-EKS re-encryption
failed!
System board.
7004
(HDCP)
Failed to check the key set
Chip-Unique-EKS!
System board.
7005
(HDCP)
Cipher Initialization with
Chip-Unique-EKS failed!
System board.
8100
Gate20 Error
1. System board.
2. DIMM.
8101
Multi-Bit ECC Error
1. DIMM.
2. System board.
8102
Parity Error
1. DIMM.
2. System board.
8103
RAM R/W test failed
1. DIMM.
2. System board.
8104
CMOS
Memory Size Wrong
1. DIMM.
2. System board.
8200
Boot Failure ...
Reseat the boot device. Confirm that boot
image is stored in the failing device.
8201
Invalid Boot Diskette
Confirm that boot image is stored in the
failing diskette.
8202
Drive Not Ready
Confirm that the boot media is installed in
the driver.
8203
A:
Drive Error
Reseat the diskette drive.
1. Diskette drive.
2. USB cable (if diskette drive has removal
USB cable.)
8204
B: Drive Error
Reseat the diskette drive.
1. Diskette drive.
2. USB cable (if diskette drive has removal
USB cable.)
8205
Insert BOOT diskette in A:
Reaset the diskette cable. Confirm that
boot image is stored in the failing diskette.
8206
Reboot and Select proper Boot device or
Insert Boot Media in selected Boot device
Reseat the bootable devices. Confirm that
the bootable device or media is in the
system.
8207
NO ROM BASIC
Reseat the bootable devices. Confirm that
the bootable device or media is in the
system.
40 ThinkPad SL400, SL400c, SL500, and SL500c Hardware Maintenance Manual