Filter
Top Products
Table 24. Installation of the fan assembly
When installing:
v Before you attach the fan assembly to the computer, apply thermal grease, at an
amount of 0.2 grams, on the part marked a as in the following figure. Either
too much or too less application of grease can cause a thermal problem due to
imperfect contact with a component. In some modes, you need to peel the thin
film off from the rubber b.
a
v Make sure that the fan connector is attached firmly.
v For ThinkPad SL400, route the antenna cables as shown in this figure.
b
80 ThinkPad SL400, SL400c, SL500, and SL500c Hardware Maintenance Manual