Filter
Top Products
Replacing the diskette drive
Attention:
Do not remove the computer cover or attempt any repair before reading the “Important
safety information” in the Quick Reference that was included with your computer or in the
Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Quick
Reference or HMM, go to the Support Web site at http://www.lenovo.com/think/support.
To replace the diskette drive:
1. Remove the computer cover. See “Removing the computer cover” on page 5.
2. Remove the front bezel. See “Removing and replacing the front bezel” on page
7.
3. Disconnect the signal and power cables from the rear of the diskette drive.
4. Remove the two screws at the side of the drive bay and slide the diskette drive
out the front of the computer.
24 Hardware Replacement Guide