Filter
Top Products
1
2
2
1
5. Remove the screw 3 . The card pops up.
3
6. Remove the card.
4
7. Align the contact edge of a new mSATA solid state drive with the corresponding socket.
8. Pivot the card downward until you can snap it into place. Secure the card with the screw.
9. Reinstall the computer cover, and then reinstall the screws to secure the cover.
10. Reinstall the battery. See “Replacing the battery” on page 31.
11. Turn the computer over again. Connect the ac power adapter and all cables.
46 User Guide