Filter
Top Products
2020 Inverter card or LED board
For access, remove these FRUs in order:
v “1010 Battery pack” on page 85
v “2010 LCD front bezel” on page 138
Table 28. Removal steps of inverter card or LED board
For ThinkPad X200, X200s, and X200si:
2
3
4
1
Step Screw (quantity) Color Torque
1 M2 × 3.5 mm, wafer-head, nylon-coated (1) Silver 0.181 Nm
(1.85 kgfcm)
When installing: Make sure that the connector 2 and 4 are attached firmly.
Cabling: When replacing the inverter card or the LED board, route the
connector cable as in this figure.
Removing and replacing a FRU 141