Win 95/98/2000/ME/NT
25
Driver installation for Windows NT 4.0
This installation procedure assumes that you have installed the
network component on your computer.
To check whether the network component has been installed,
double click the Network icon in the Control Panel. If it has not
been installed, refer to the Windows NT 4.0 installation guide for
instructions on installing the component.
Follow the steps below to install the driver.
1. Insert the LevelOne 10/100Mbps 32bit Fast Ethernet PC
Card into an available CardBus slot on your notebook (refer
to page 6 “Inserting the LevelOne 10/100Mbps 32bit Fast
Ethernet PC Card”).
2. Log in to NT 4.0 as “Administrator”.
3. Double click the Network icon in the Control Panel, and
select the Adapters tab as shown in the following screen: