Filter
Top Products
Driver installation for DOS environments
39
Socket and Card Services to your notebook before executing the
driver. If you do not have the Socket and Card Services program,
please contact your notebook vendor.
The Install program can use the following syntax and format:
RTPCI /?[h] /l /r<d> /s<d> /i<dd> /p<xxxx> /m<xxxx>
where
/? Display this message
/h Display this message
/l List PCI config space
/r IRQ routing [1=PCI, 2=ISA]
/s Socket number (dec) [0-1]
/I IRQ line number (dec) [00-15]
/p I/o base address (hex) [1000-FF80]
/m Mem base address (hex) [C000-FFC0]
After you executed RTPCI.EXE, you will see a display similar to
the following indicating that the installation was successful:
I/o hole : 1000
Mem hole : CC00
IRQ:-1, I/O: 100h , MEM: CC00h,
SOCKET:A
bus: 002, dev: 00, fun: 0, irq: 11