Filter
Top Products
LevelOne Fast Ethernet PC Card user’s manual
42
4. Select Add New Configs and then press <Enter>.
5. Select Other Driver and press <Enter>.
6. Insert the driver disk into the floppy drive and click OK.
7. Select the Network Adapter Driver, CardBus 10/100Mbps
Ethernet Card, then click OK.
8. Press <Spacebar> to select the desired protocol.
9. Click OK. The message Configuration Complete appears.
10. Click Save, then press <F3> to exit.
Artisoft LANtastic version 6.0
Follow these instructions to install the Artisoft LANtastic Version
6.0 client for your Fast Ethernet PC Card:
1. Run the INSTALL program, and choose LANtastic.
2. Select Artisoft LANtastic, and specify C:\LANTASTI as the
destination directory.
3. When the Select network adapter screen appears, choose
NDIS Support for Network Adapters.
4. When the install program prompts you for the manufacturer's
driver disk in the Enter NDIS driver directory screen, insert the
driver disk.
Follow the instructions on the screen to complete the installation,
then reboot the computer to start LANtastic.