LevelOne FPS-2013TXU Printer User Manual


 
Level One Printer Servers
Diagnostic Push Button
Models FPS-2101TXU and FPS-2003TXU are fitted with a "Diagnostic Push Button".
This button is used to restore the factory default settings, or to print a test page. The test
page will contain all the current settings, and will be output to the printer attached to port 1.
To restore the factory default settings:
1. Turn the LevelOne Printer Server OFF.
2. Press and hold the diagnostic button. While pressing the button, switch the LevelOne
Printer Server ON.
3. If you continue pressing the button for 10 seconds, a diagnostic page will be printed,
showing the new settings.
To generate a Diagnostic print out
1. Ensure that both the LevelOne Printer Server and the printer attached to port 1 are ON.
2. Press the diagnostic button, and hold it in for 2 seconds.
3. The test page, containing the current settings, will be printed.
Note: PostScript printers are unable to print this page. If you have a PostScript printer on
port 1, the test page will not be printed.
- 12 -