Filter
Top Products
5
LED Indicators
LED Indicators
LED Function
Color Description
PWR Green Lit: Power on
SMART Green Lit: CPU installed
LINK/ACT Green/Yellow Green Lit: 100Mbps, indicates the adapter is
connected to hub and incoming
Yellow Flash: 10Mbps, traffic entering the port
10/100
L10/100/1000
Green Lit: indicate link status and traffic speed
(10/ L10 for 10M, 100/ L100 for 100M,
1000/ L1000 for 1000M)
TX/ RX Green Lit: indicate data traffic status
(TX for transmitting, RX for receiving)
FDX/ COL Green Lit: Full-Duplex
Flash: Half-Duplex/ Collision
Off: Half-duplex or not connected
Reset Switch
At the left side of front panel, the reset switch is designed for
reconfiguring the switch hub without turn off and on the power.
CONNECTING THE SWITCH
Connecting End node or Hub or Switch
1. Place the Switch on a smooth surface or fasten the mounting
brackets with the provided screws in a standard 19” rack
2. Connect the DC jack of AC adapter to the DC inlet socket of
Switch and the other end into the local power source outlet