Filter
Top Products
10
Speed Mode
Entry:
Select “0” from Main Menu.
Purpose:
Media Speed Control for each port.
Default:
All ports are auto- negotiation.
1.Input port number for which you want to configure, ’A’ or ‘a’ for select
all port to configure, type ‘E’ or ‘e’ back to Main Menu, than press
ENTER. For example, input port 1:
2. Type 1-5 to select speed mode.
3. Type ‘Y’ ,’y’ or ‘N’ ,’n’ to enable or disable flow control , After finish
flow -control selection, you can configure another port or type ‘E’ or
‘e’ , press ENTER back to main menu.
which port ? (1 - 26 , 25=G1, 26=G2, E:Exit ,
A:Select all ports)...
1
Port Setting
[1] Auto-negotiation
[2] 10 Half Duplex
[3] 10 Full Duplex
[4] 100 Half Duplex
[5] 100 Full Duplex
Select :>>
Select :>> 1
Enable flow control ? (Y/N)