Filter
Top Products
20
Uplink Port
Entry:
Select “5” from Main Menu.
Purpose:
The uplink port provides a way to connect the switch with a repeater
hub, a workgroup switch, a router, or any type of interconnecting
device compliance with IEEE 802.3 standards. Switch will send all
frames with unmatched DA and multicast/broadcast frames to the
uplink port. It is very important that each port is assigned to an uplink
port, or data frames might be lost. The uplink port should be configured
to be within the same VLAN as the source port. If the uplink port is not
a member of the VLAN, the broadcast or multicast frames will not be
forwarded to its designated uplink port. Multiple VLANs can share the
same uplink port.
Default:
Disable
Example : assume already configure two VLANs ,VLAN A have port
1 ,2 ,3 ,4 ,5, 6,7,8,9. others belong to VLANs B .assign uplink port 9 for
VLANs A ,port 10 for VLAs B.
1. type ‘S’ or ‘s’ to select port
2. input ‘1’ and press ENTER
Select :>> 5
Uplink Port
UpLink Group 1 ,assigned ports>>
[S] Port Select
[D] Port Delete
[A] Select All Ports
[C] Continue
[E] Exit
Select :>> s
Which Port To be Selected (1
-
26)..., (25 = G1 26 = G2)