Filter
Top Products
l
41
IP Range:
The switch supports two kinds of options for managed valid IP Range,
including “Any” and “Custom”. Default is “Any”. In case that” Custom” had
been chosen, you can assigned effective IP range. The valid range is
0.0.0.0~255.255.255.255.
Incoming Port:
The switch supports two kinds of options for managed valid Port Range,
including “Any” and “Custom”. Default is “Any”. You can select the ports
that you would like them to be worked and restricted in the management
security configuration if ”Custom” had been chosen.
Access Type:
The switch supports two kinds of options
for managed valid Access Type,
including “Any” and “Custom”. Default is “Any”. “Http”, “Telnet” and “SNMP”
are three ways for the access and managing the switch in case that”
Custom” had been chosen.
Action:
The switch supports two kinds of options
for managed valid Action Type,
including “Deny” and “Accept”. Default is “Deny”. When you choose “Deny”
action, you will be restricted and refused to manage the switch due to the
“Access Type” you choose. However, while you select “Accept” action, you
will have the authority to manage the switch.
Edit/Create:
A new entry of Management Security Configuration can be created after
the parameters as mentioned above had been setup and then press
<Edit/Create> button. Of course, the existed entry also can be modified by
pressing this button.
Delete:
Remove the existed entry of Management Security Configuration from the
management security table.