Filter
Top Products
4.3.3. Status
Click Status under Environment to see the status of the EMD connected
to the IPS-0008. The menu page displays the temperature and humidity
of the environment sensor, as well as the open/close conditions of the
EMD alarms.
4.3.4. Configuration
Click Configuration under Environment to configure the EMD connected
to the IPS-0008. This menu enables you to set up the sensor names,
high and low set points, calibration offsets for the sensors, as well as
alarm names and normal conditions. You can also specify which EMD
events and alarm conditions cause which power and digital outlets to be
turned off.
33