Filter
Top Products
Wireless LAN Access Point Configuration
Once user has configured user’s PC to obtain an IP address automatically, please proceed to
Step 3.
1c) Windows 2000
1. Click the Start button and select Settings, then click Control Panel. The Control Panel
window will appear.
2. Double-click Network and Dial-up Connections icon. In the Network and Dial-up
Connection window, double-click Local Area Connection icon. The Local Area Connection
window will appear.
3. In the Local Area Connection window, click the Properties button.
4. Check user’s list of Network Components. User should see Internet Protocol [TCP/IP] on
user’s list. Select it and click the Properties button.
5. In the Internet Protocol (TCP/IP) Properties window, select Use the following IP address
and specify the IP Address and Subnet mask as following.
9 IP Address: 192.168.2.3 (any IP address within 192.168.2.2~192.168.2.254 is
available, do not setup 192.168.2.1)
9 Subnet Mask: 255.255.255.0
6. Click OK to confirm the setting. User’s PC will now have the IP Address user specified.
2. Enter 192.168.2.1 from Web Browser to get into the Access Point’s configuration
tool.
3. A screen will be popped up and request user to enter user name and password. The
default user name and password is as follows.
User Name: Admin
Password: 1234
Enter the default user name and password, then press OK button directly.
8