Filter
Top Products
N_Max Wireless CardBus Adapter
16
Fragment Thre-
shold
The default value is 2346. In some cases, you may be able to
improve performance by adjusting this value.
RTS/CTS Thre-
shold
The default value is 2346. In some cases, you may be able to
improve performance by adjusting this value.
802.11n
Enable 802.11n
Network
802.11n wireless network connectivity
Channel Width
The width of the Channel, either 20Mhz or 40Mhz. The default
value is set as “Auto.”
Guard Interval
This is used to ensure that transmissions do not interfere with
each other. This value is set as "Auto"
Extension Chan-
nel
Auto selects the wireless channel. The value is set to “Auto” It
will auto select the most suitable channel.
Antenna Selection
The default value is set to "Auto".
WPS Function Screen
The Wi-Fi Protected Setup (WPS) is to simplify the security setup and management of
Wi-Fi networks. WPS (Wi-Fi Protected Setup) allows consumers to protect their home
networks by using the push button configuration on the router, or entering an 8-digit PIN
code if there's no button.
You will see the WPS screen when you try to connect the wireless network with the
WPS function.
Figure: WPS Function Screen