Filter
Top Products
LAN Installation
Page 9
5. Check the LEDs
• The Red Error LED should flash, then turn Off. When the Red LED goes off and the
Green LED remains lit or flashes, the LevelOne Printer Server is ready.
• For models with USB ports, the Red Error LED will remain flashing if the LevelOne
Printer Server can't connect to the printer.
• If your model supports 10BaseT and 100BaseT, check the 10/100BaseT link LED or
LEDs next to the LAN connection. If the auto negotiation Fails, the LED (or both LEDs, if
there are 2) will be Off. In this case, set the DIP switches to suit your LAN, as described in
the DIP Switch Table in Chapter 1.