Filter
Top Products
Scan positives (such as 35 mm slides)
The transparent materials adapter (TMA) in this model enables you to scan as many as
two 35 mm slides at one time, depending on orientation. To scan 35 mm slides, use the
slide holder that is part of the built-in TMA.
1. Open the scanner lid.
2. Remove the TMA cover.
3. Remove the negative strip holder, if present, from the slide holder.
4. Place the slides into the slide holder. Insert the slides with the top of the slides
pointing up and with the front of the slides facing you.
5. Close the scanner lid.
Note Make sure that the slides are flat and do not overlap. Do not press
the Scan Film button until the slides are loaded and the lid is closed.
6.
Press the Scan Film (
) button on the scanner, or click Scan Film in the HP
Solution Center.
7. In the HP Scanning dialog box, select Picture.
8. Select Scan positives, including 35 mm slides, using the TMA.
If you want to preview the scanned image, select the Show Preview check box on
the screen, or begin the scan from the HP Solution Center.
Chapter 1
8 HP Scanjet G3010