Filter
Top Products
6 Adjust the width guide to lightly touch the edge of the paper stack. Make sure the paper fits loosely in the
multipurpose feeder, lies flat, and is not bent or wrinkled.
7 From the printer control panel, set the Paper Size and Paper Type for the multipurpose feeder (MP Feeder Size and
MP Feeder Type) based on the paper you loaded.
Loading letter‑ or A4‑size paper in the short‑edge orientation
By default, the printer is set to recognize letter‑ or A4‑size paper loaded in the long‑edge orientation. If you want to
load letter‑ or A4‑size paper in the short‑edge orientation, make sure you enable “Short Edge printing”.
1 Make sure the printer is off.
2 Press and hold and the right arrow button while turning the printer on.
3 Release the buttons when the screen with the clock animation appears.
The printer performs a power‑on sequence, and then the Configuration menu appears.
4 Press the up or down arrow button until Short Edge printing appears, and then press .
5 Press the up or down arrow button to select Enable or Disable, and then press Submit.
Submitting Change appears.
6 Press the up or down arrow button until Exit Config Menu appears, and then press Submit.
Resetting the Printer appears.
Loading paper and specialty media 54