Filter
Top Products
Use To
Mirror Image
Off
On
Create a mirror image of the original document.
Note: Off is the factory default setting.
Negative Image
Off
On
Create a negative image of the original document.
Note: Off is the factory default setting.
Shadow Detail
‑4 to 4
Adjust the amount of shadow detail visible on a scanned image.
Note: 0 is the factory default setting.
Scan edge to edge
Off
On
Allow edge-to-edge scanning of the original document.
Note: Off is the factory default setting.
Sharpness
1–5
Adjust the amount of sharpness of a scanned image
Note: 3 is the factory default setting.
Print Settings
Setup menu
Use To
Printer Language
PCL Emulation
PS Emulation
Set the default printer language.
Notes:
• PS Emulation is the factory default setting. PS Emulation uses
a PS interpreter for processing print jobs.
• PCL Emulation uses a PCL interpreter for processing print
jobs.
• Setting a printer language as the default does not prevent a
software program from sending print jobs that use another
printer language.
Print Area
Normal
Fit To Page
Whole Page
Set the logical and physical printable area.
Notes:
• Normal is the factory default setting. When attempting to
print data in the non‑printable area defined by the Normal
setting, the printer clips the image.
• Fit To Page fits the page content into the selected paper size.
• Whole Page allows the image to be moved into the
non‑printable area defined by the Normal setting, but the
printer clips the image at the Normal setting boundary. This
setting affects only pages printed using a PCL 5e interpreter
and has no effect on pages printed using the PCL XL or
PostScript interpreter.
Understanding the printer menus 115