Lexmark 333 All in One Printer User Manual


 
Try one or more of the following:
Press
to clear the message and continue printing.
Remove extra flash options:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove extra flash options.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
58 Too many trays attached
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the additional trays.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
58 Input config error
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove and re-configure the additional trays.
Note: If you installed both the optional 550-sheet tray and the 650-sheet duo drawer, then the optional 550-sheet
tray must be installed as the first tray (configuring from the bottom up).
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
59 Incompatible tray <x>
Only options designed specifically for this printer are supported.
Try one or more of the following:
Remove the specified tray.
Press
to clear the message and continue printing without using the specified tray.
82 Replace waste toner box
Replace the waste toner bottle. For more information, see “Replacing the waste toner bottle” on page 179.
82.yy Waste toner box missing
Replace the waste toner bottle, and then press to clear the message and continue printing.
Understanding printer messages
171