Filter
Top Products
Menu item Description
Mac Binary PS
Auto
On
Off
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
• Auto is the factory default setting.
• The Off setting filters print jobs using the standard protocol.
• The On setting processes raw binary PostScript print jobs.
Network Setup
Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
Sets printer settings on jobs sent through a network port
Note: Certain options are not available on selected printer models.
Reports menu
This menu is available from the Network/Ports menu:
Network/Ports Network Menu Reports
Menu item Description
Print Setup Page Prints a report containing information about the current network setup
Note: The Setup Page contains information about the network printer settings, such as the TCP/IP address.
Network Card menu
This menu is available from the Network/Ports menu:
Network/Ports Network Menu Network Card
Menu item Description
View Card Status
Connected
Disconnected
Lets you view the connection status of the network card
View Card Speed Lets you view the speed of a currently active network card
Network Address
UAA
LAA
Lets you view the network addresses
Job Timeout
0-225 seconds
Sets the amount of time in seconds that a network print job can take before it
is canceled
Notes:
• 90 seconds is the factory default setting.
• A setting value of 0 disables the timeout.
• If a value of 1–9 is selected, then the setting is saved as 10.
Understanding printer menus
76