Lexmark 544dn Printer User Manual


 
Menu item Description
Layout
Auto
Off
2 Up
3 Up
4 Up
6 Up
9 Up
12 Up
16 Up
Index Print
Determines the maximum number of images that can be printed on one side of the
paper
Notes:
Auto is the factory default setting.
If both the printer and the PictBridge-enabled digital camera have a value for
this setting, the camera value always supersedes the printer value.
Quality
Normal
Draft
Fine
Determines which resolution, toner darkness, and color saver values the printer uses
when printing photos sent from a PictBridge-enabled digital camera
Notes:
Normal is the factory default setting.
If both the printer and the PictBridge-enabled camera have a value for this
setting, the camera value always supersedes the printer value.
Paper Source
Manual Paper
MP Feeder
Tray <x>
Identifies the printer default input source when printing photos from a
PictBridge-enabled digital camera
Notes:
Manual Paper is the factory default setting.
A photo size larger than the size of the media installed in the PictBridge-enabled
digital camera cannot be selected.
Flash drive menu
Note: The USB Direct Interface is not available on select printer models.
Menu item Description
Enable Drive
Enable
Disable
Enables or disables the USB port on the front of the printer
Note: Enable is the factory default setting.
Update Code
Enable
Disable
Enables or disables the ability of the flash drive to update the firmware code by way
of a USB device
Note: Enable is the factory default setting.
Copies
1–999
Sets the number of copies the printer should produce for each page contained in a
print job
Note: 1 is the factory default setting.
Sides (Duplex)
1 sided
2 sided
Controls whether the printer prints on one side or both sides of the paper
Note: 1 sided is the factory default setting.
Understanding printer menus
94