Filter
Top Products
clipped pages or images 285
gray background on prints 286
horizontal voids appear on
prints 287
print irregularities 290
print is too dark 291
print is too light 292
printer is printing solid black
pages 294
repeating print defects 295
shadow images appear on
prints 295
skewed print 296
streaked horizontal lines appear
on prints 297
streaked vertical lines appear on
prints 298
toner fog or background shading
appears on prints 299
toner rubs off 300
toner specks appear on prints 300
transparency print quality is
poor 301
uneven print density 301
vertical voids appear on
prints 301
Print Settings menu 184
print troubleshooting
error reading flash drive 279
held jobs do not print 278
incorrect characters print 279
incorrect margins on prints 288
jammed pages are not
reprinted 276
job prints from wrong tray 280
job prints on wrong paper 280
jobs do not print 282
Large jobs do not collate 280
multiple‑language PDF files do not
print 281
paper curl 289
paper frequently jams 276
print job takes longer than
expected 283
printing slows down 281
tray linking does not work 284
unexpected page breaks
occur 284
printer
configurations 11
minimum clearances 10
models 11
moving 10, 237
selecting a location 10
shipping 238
printer control panel
factory defaults, restoring 241
indicator light 16
parts 14
Sleep button light 16
using 14
printer control panel, virtual
display
using the Embedded Web
Server 239
Printer had to restart. Last job may
be incomplete. 266
printer hard disk
disposing of 208
encrypting 210
wiping 210
printer hard disk encryption 210
printer hard disk memory
erasing 210
printer information
where to find 9
printer IP address
finding 19
printer is printing blank pages 293
printer message
[x]‑page jam, open front door to
clear duplex [23y.xx] 252
printer messages
[Color] cartridge low [88.xy] 259
[Color] cartridge nearly low
[88.xy] 259
[Color] cartridge very low, [x]
estimated pages remain
[88.xy] 259
[Type] imaging kit low [84.xy] 271
[Type] imaging kit nearly low
[84.xy] 271
[Type] imaging kit very low, [x]
estimated pages remain
[84.xy] 271
[x]‑page jam, clear manual feeder
[251.xx] 254
[x]‑page jam, clear multipurpose
feeder [250.xx] 255
[x]‑page jam, clear standard bin
[203.xx] 245
[x]‑page jam, open automatic
feeder top cover [28y.xx] 257
[x]‑page jam, open front door
[20y.xx] 251
[x]‑page jam, open front door to
clear fuser [20y.xx] 248
[x]‑page jam, open tray [x]
[24y.xx] 253
Adjusting color 258
Change [paper source] to [custom
string] 258
Change [paper source] to [custom
type name] 258
Change [paper source] to [paper
type] [paper size] 258
Close door 258
Close flatbed cover and load
originals if restarting job
[2yy.xx] 259
Complex page, some data may not
have printed [39] 259
Configuration change, some held
jobs were not restored [57] 259
Defective flash detected [51] 260
Disk full [62] 260
Disk must be formatted for use in
this device 260
Error reading USB drive. Remove
USB. 260
Error reading USB hub. Remove
hub. 260
Fax partition inoperative. Contact
system administrator. 260
Fax server 'To Format' not set up.
Contact system
administrator. 260
Fax Station Name not set up.
Contact system
administrator. 261
Fax Station Number not set up.
Contact system
administrator. 261
Incompatible tray [x] [59] 261
Incorrect paper size, open [paper
source] [34] 261
Insert Tray [x] 261
Insufficient memory for Flash
Memory Defragment operation
[37] 261
Insufficient memory to collate job
[37] 262
Insufficient memory to support
Resource Save feature [35] 262
Index 344