Lexmark 90T7005 Printer User Manual


 
Use the To
1
Scanner unit Access the ink cartridges.
2 Printhead Install, replace, or remove the ink cartridges.
3
Ethernet port Connect your printer to a computer, a local network, an external DSL, or a cable modem.
4 USB port Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when plugging in or
removing a USB cable or installation cable.
5
LINE port Connect the printer to an active telephone line (through a standard wall jack, DSL filter,
or VoIP adapter) to send and receive faxes.
6 EXT port Connect additional devices (telephone or answering machine) to the printer and the
telephone line. Use this port if you do not have a dedicated fax line for the printer, and
if this connection method is supported in your country or region.
Note: Remove the plug to access the port.
7
Power supply with port Connect the printer to a power source using the power cord.
8
Duplex unit
Print on both sides of a sheet of paper.
Remove paper jams.
About your printer
10