Lexmark 90T7005 Printer User Manual


 
CHECK THE NETWORK CONNECTION
If the printer and computer are connected over a network, then make sure that the correct host and device are
communicating. Select the printer from the computer or the computer from the printer.
Photos do not transfer from a memory card across a wireless
network
If the "Memory card troubleshooting checklist" does not solve the problem, then try one or more of the following:
MAKE SURE THAT BOTH THE PRINTER AND THE DESTINATION COMPUTER ARE TURNED ON AND
READY
SELECT THE CORRECT COMPUTER NAME FROM THE LIST ON THE PRINTER
MAKE SURE YOUR WIRELESS NETWORK IS CONNECTED AND ACTIVE
If your wireless connection is down, then use a USB cable to connect your printer to your computer.
Network troubleshooting
“Network troubleshooting checklist” on page 144
“The Continue button is unavailable” on page 145
“Cannot print and there is a firewall on the computer” on page 147
“Communication with printer lost when connected to Virtual Private Network (VPN)” on page 147
Network troubleshooting checklist
Before beginning to troubleshoot the wireless printer, verify the following:
General Networking
Make sure:
The printer, the computer, and the wireless access point are all plugged in and turned on.
The wireless network is working properly.
Try accessing other computers on your wireless network. If your network has Internet access, try connecting to
the Internet over a wireless connection.
The printer driver is installed on the computer from which you are performing a task.
The correct printer port is selected.
The IP address, gateway, and network mask are correct for your network.
Print a network setup page from the printer to check the network settings.
All switches, hubs, and other connecting devices are turned on.
Troubleshooting
144