Filter
Top Products
38
Configure for TCP/IP
Verifying the
IP settings
1 Print another Network Setup page. Look under the “TCP/IP”
heading and make sure the IP address, netmask, and gateway
are what you expected.
See “Printing setup pages” on page 35 if you need help.
Note: On Windows
computers, click Start
Programs Command
prompt (or Accessories
Command prompt if using
Windows 2000).
2 Ping the printer and verify that it responds. For example, at a
command prompt on a network computer, type “ping” followed
by the new printer IP address (for example, 192.168.0.11):
ping xxx.xxx.x.xx
If the printer is active on the network, you receive a reply.