Filter
Top Products
104
Important: On IPDS code level 8223 and above, the IPDS emulation may be
shared by IPDS hosts connected to the printer using the SCS adapter
(Coax or Twinax attachment) and IPDS hosts connected to the printer
using a MarkNet S, MarkNet Pro, or MarkNet XLe. When sharing
the printer between these types of connections, the IPDS emulation
will delete downloaded resources from one host session before
beginning another session.
Example
IPDS resources have been downloaded during a session with a host
connected through the SCS card (Coax or Twinax attachment). These
resources will be deleted by the IPDS emulation when an IPDS job is
received from a LAN attached host. When another IPDS job is
received through the SCS card, the printer will return a Printer Reset
exception to the host. The host will download the resources again
with the next IPDS job.
On IPDS code level 8222 and below, the IPDS emulation cannot be
shared by IPDS hosts connected to the printer using the SCS adapter
(Coax or Twinax attachment) and IPDS hosts connected to the printer
using a MarkNet S, MarkNet Pro, or MarkNet XLe. IPDS jobs will
either be accepted through the LAN connection or the Coax/Twinax
connection, but not both. If you try to share the IPDS emulation
between the connections, the printer will stop and display the
message Two IPDS Sources Recycle Power. The connection
through which the IPDS emulation first receives data will be the only
connection recognized by the SIMM for IPDS.
Note: When using the SCS Coax/Twinax adapter in a printer with a SIMM
for IPDS installed, the Coax or Twinax Timeout value overrides the
IPDS Timeout value.