Filter
Top Products
66
Example
IPDS resources have been downloaded during a session with a host
connected through the SCS card (Coax or Twinax attachment). These
resources will be deleted by the IPDS emulation when an IPDS job is
received from a LAN attached host. When another IPDS job is
received through the SCS card, the printer will return a Printer Reset
exception to the host. The host will download the resources again
with the next IPDS job.
On IPDS code level 8222 and below, the IPDS emulation cannot be
shared by IPDS hosts connected to the printer using the SCS adapter
(Coax or Twinax attachment) and IPDS hosts connected to the printer
using a MarkNet S, MarkNet Pro, or MarkNet XLe. IPDS jobs will
either be accepted through the LAN connection or the Coax/Twinax
connection, but not both. If you try to share the IPDS emulation
between the connections, the printer will stop and display the
message Two IPDS Sources Recycle Power. The connection
through which the IPDS emulation first receives data will be the only
connection recognized by the SIMM for IPDS.
If you are installing a:
• MarkNet S adapter – Go to section 5.2 Configuring a MarkNet S Adapter on
page 66.
• MarkNet Pro print server – Go to section 5.3 Configuring a MarkNet Pro on
page 69.
• MarkNet XLe print server – Go to section 5.4 Configuring a MarkNet XLe
on page 71.
5.2 Configuring a MarkNet S Adapter
To enable IPDS printing with a MarkNet S adapter, several settings must be changed.
You can make these changes from the printer operator panel. For more information on
how to change these settings, refer to the Network Adapter User’s Guide or the
Network Adapter Hardware Setup manual, which came with your adapter.