Filter
Top Products
11
1 Introduction
1.1 Equipment Requirements and Specifications
Thank you for purchasing the SIMM (Single Inline Memory Module) for IPDS. This
provides your printer with high quality IBM host connectivity print output. With the
appropriate adapter and host software, your printer becomes an IBM host workstation
printer capable of printing AFP or IPDS documents from an AS/400, System/370,
System/390, or System/36.
To use the SIMM for IPDS, your Lexmark Optra printer must have a minimum of 4 MB
of installed memory and one of the following:
• a MarkNet S internal network adapter for connection to a Token-Ring or
Ethernet LAN.
• a Coax/Twinax Adapter for SCS internal adapter for connection to a host via
coax or twinax cables.
• a MarkNet Pro print server for external connection (using the parallel port) to
a Token-Ring or Ethernet LAN.
• a MarkNet XLe print server for external connection (using the parallel port)
to a Token-Ring or Ethernet LAN.
Code Levels Required:
MarkNet Pro 2.9.15 (or greater)
MarkNet XLe 04.130.01 (or greater)
SCS Adapter H01-7482 (or greater) for coax
H02-7451 (or greater) for twinax
For help determining your code levels, see chapter 5 Using the SIMM for IPDS with a
MarkNet Adapter or MarkNet Print Server or chapter 6 Using the SIMM for IPDS with
the SCS Adapter.
If you need to update your adapter’s code level, contact the Lexmark Technical
Support Center. MarkNet print server and SCS adapter firmware updates are also
available from the Lexmark web site at http://www.lexmark.com.